Termites are considered to be the most destructive insect pests in the world because of their history. Lots of buildings and structures are damaged each year, resulting in huge financial losses. There are mainly 3 types of termites found in Asian countries: subterranean termites, dry wood termites, and damp wood termites. They eat wooden structures, pipes used for plumbing and electrical purposes, plywood, plastic filters used in swimming pools, wood in roofs, rafters, etc. DFM Greenland India’s anti-termite service offers complete protection for your buildings and structures from all kinds of termites with scientific and quality treatments.
For the past 20 years, DFM Greenland India has been the trusted brand of many customers. We are using the German IPM product Bayer and Advanced Tools to get rid of termites. There are mainly two types of anti-termite service: pre-construction treatments and post-construction treatments. Pre-construction treatment has a 10 to 15-year service warranty. The post-construction treatment is determined after an inspection.
Pre-Construction Anti-Termite Service
- Foundation Trench Treatment
- Soil Treatment
- Treatment of wooden members
- External Perimeter Treatment
Post-Construction Anti-Termite Service
- Treatment of soil under floors
- Treatment of wood works
- External perimeter treatment
Get more details
Anti-termite Service For Foundation Treatment:
When the foundation trenches, column pits etc. are ready to take mass concrete in foundation. Our technical team will treat the bottom surface and the sides of the excavated trenches and pits with chemicals of required concentration by spraying uniformly.
Anti-termite Service For Soil Treatment:
Our Technical team will make 2 layers of holes on soil leveled floors, with 32mm dia & in 10-inch depth from the wall side with a crowbar in one-foot intervals. And the rest of the layers will be in 2-foot intervals 6-inch depth. Then adequate measures of recommended chemicals are injected into these holes by a motorized pressure pump (IPM recommended) and close it properly. In the end of the treatment process the entire floor also will be sprayed with the same.
Anti-termite Service For Wood Treatment:
The technical team will drill the corner side of the window frame and door frames. After completion of this initial process, the concentrated chemical (standard measure) will be injected into these holes by a pressure pump, and sealed properly.
External perimeter Treatment:
We will make a chemical barrier surrounding the building. Then our technical team will make holes on interlock floors with 10 mm dia in every 1.5-foot Intervals by a drilling machine. After that, the measured insecticide is pumped into these holes by a motorized pressure pump and will seal it properly.
Anti-Termite Piping System
It is a Pre-construction Termite Treatment. In the process, we plant some PVC pipes into the ground around the building foundation to create an anti-termite chemical pathway that injects at any time without making a hole in your floor.
The advantages of piping systems
- Very suitable to maintain floor surfaces because when your anti-termite chemical is no longer functioning, you can inject the anti-termite chemical again through the end of the pipe hole without drilling your floor.
- Since the installation process is a one-time process, chemicals can be injected again in the future without damaging the floor
The anti-termite piping system stage
- In this anti-termite service first, we make a hole in the pipe using the smallest drill bit to release the termite chemical solution from the pipe.
- Then, PVC pipes are coated using a soft cloth so that when injecting chemicals, the water that comes out of the pipe hole does not flow too hard.
- With the embedded pipe near the foundation of the building, it is certain that your building will be safe from termite attack for a very long time from termite attack.
